Epoxy Paint

Product Details:

This is 2 pack coal tar epoxy coating for metal surface. High solids, high build two component tar filled coating formulated to provide excellent film build in one or two coats. The high level of cross linking provides an excellent barrier coat for immersion service in fresh, salt or waste water.

  FEATURES:

1.     Provides excellent resistance to salt, alkali, acid solutions.

2.     Excellent resistance to mild solvents.

3.     Apply directly to the substrate.

4.     Excellent water resistance.

5.     Good corrosion & abrasion resistance.

6.     High build DFT in one coat.

Additional Information:

• Delivery Time: 2-3 Days
• Packaging Details: 1(20+5) = 25 Litre

Product Details:

It is two component high build epoxy anticorrosive primer, cured with polyamide resin. Usually medium molecular weight epoxy resin use in base component which reacts with polyamide or phenalkamine hardner. After reaction it converted in hard unbreakable film.

  FEATURES:

1.     Excellent flexibility.

2.     Good resistance to marine environment.

3.     Excellent resistance to salt, alkali, acid solutions.

4.     Excellent anticorrosive performance.

5.     Outstanding toughness.

6.     Excellent adhesion too many type of substrate.

 

Additional Information:

• Delivery Time: 2-3DAYS
• Packaging Details: BASE + HARDNER 1(4+1) = 5 1(8+1) = 10 1(20+5) = 25 1(20+5) = 25

Product Details:

1K Epoxy primer is an all-purpose 1K primer that provides excellent adhesion and corrosion prevention on sheet steel, zinc-coated steel, aluminium and anodised aluminium. It is fast drying with good flow and can be applied wet-on-wet. It also offers good insulation against humidity.

Additional Information:

• Delivery Time: 2-3 days
• Packaging Details: 1X4 = 4 LITER 1X10 = 10 LITER 1X20 = 20 LITER

Product Details:

Additional Information:

• Production Capacity: 5000
• Delivery Time: 5 DAYS
• Packaging Details: 25 LTR

Product Details:

Safety Directions:-

• Flammable, keep away from hest, spark etc.
• Harmful do not breathe, use with adequable ventilation.
• Avoid contact with skin.
• In case of eye contact flush with water for 15 minutes call of medical help.
• If swallowed, do not induce vomiting. Call for medical help.
• keep out of reach of children.
• Use proper equipment.
• To be used by skilled personnel only.

Important Instructions:- 

• Shake & Stir each container prior to using/mixing.
• In case of two pack products, mix base & hardener throughly.
• In the recommended ratio, use the mixed solutions In the pot life.
• Replace the cap tightly after decanting the required store in cool dry place keep away from direct sunlight.
• Store under the shed.

Recommended Use:
Provides excellent cathodic protection in extreme saline & corrosion atmosphere. Anticorrosive Bituminous Paint Black Metal Cheap anticorrosive paint for Steel exposed to corrosive industrial & coastal environment.  

Product Details:

Introduction: This is 2 pack cold cure epoxy finish cured with polyamide/ phenalkaminehardner. It is fast drying micaceous iron oxide pigmented high solid, high build product. Micaceous iron oxide enhances toughness & achieves good barrier & chemical resistance properties. This is an intermediate coat between epoxy primer & finish coat to build the overall dry film thickness for better protection of the surface from corrosion.
Features: 1. Excellent corrosion resistance in wide range of corrosive conditions.2. Good resistance abrasion & impact3. Excellent resistance moisture & saline products.4. Very good durability5. Outstanding toughness.
Application Areas: This product is use as a heavy duty intermediate coat for structural steel in chemical industries, fertilizer plant, power plants, petrochemical plants, Pulp& paper mill. Recommended use for offshore environment.

Product Details:

Product Details:

Additional Information:

• Delivery Time: 1-2 DAY

Product Details:

This is 2 pack epoxy high performance, tough & durable coating.  Cold cure & baking both are possible for this coating.

  FEATURES:

1.     High resistance to impact & abrasion.

2.     Outstanding chemical resistance.

3.     It gives decorative appeal.

4.     Excellent flexibility.

5.     Resistance to spillage of mild solvent.

6.     Unaffected by oil & grease.

Additional Information:

• Delivery Time: 1-2 DAYS
• Packaging Details: 1(4+1)=5ltr, 1(8+2)=10ltr, 1(20+5)=25ltr

Product Details:

2 pack epoxy high performance, tough & durable coating.  Cold cure & baking both are possible for this coating.

  FEATURES:

1.     High resistance to impact & abrasion.

2.     Outstanding chemical resistance.

3.     It gives decorative appeal.

4.     Excellent flexibility.

5.     Resistance to spillage of mild solvent.

6.     Unaffected by oil & grease.

7.     Low shrinkage during cure.

8.     Excellent weather resistance.

APPLICATION AREAS:

This product is use in structural steel work in fertilizer, chemical, refineries, pipelines, storage tanks, Material handling equipment, Conveyor, Heavy fabrication.

Additional Information:

• Delivery Time: 2-3DAYS
• Packaging Details: 1(4+1)=5LTR, 1(8+2)=10LTR, 1(20+5)=25LTR